The distinction between oil-based and water-based polyurethane lies in their raw material selection, synthesis process, and catalytic systems.


Release time:

2026-03-16

 Polyurethane materials are widely used in coatings, adhesives, building materials, and other fields. Based on the dispersing medium, they are primarily categorized into oil-based and water-based polyurethane. The differences in performance and applications between the two types stem from variations in these aspects.

1. Raw Material Differences: Both dispersion media share core components including polyols (polyether or polyester) and isocyanates (e.g., TDI, MDI, IPDI), with distinctions lying in the selection of dispersion media and auxiliary materials. Oil-based polyurethane employs organic solvents as dispersion media, commonly polar solvents like esters and ketones. These formulations require no additional hydrophilic additives, as the polyurethane resin is uniformly dispersed through solvent dissolution. The raw material system remains relatively simple, primarily consisting of polyols, isocyanates, and solvents, with some products incorporating minor additives to optimize film-forming properties. In contrast, water-based polyurethane uses water as the dispersion medium, necessitating the incorporation of hydrophilic chain extenders (e.g., DMPA, carboxylates) and neutralizers (e.g., triethylamine) in the raw materials. These hydrophilic components generate hydrophilic groups (e.g., carboxyl, sulfonic acid groups) within the polyurethane molecular chain, enabling stable dispersion of the resin in water to form an emulsion. Water-based systems typically also require emulsifiers, stabilizers, and other auxiliary materials to ensure storage and usage stability of the emulsion.

II. Synthesis Reactions: While both processes fundamentally involve the polycondensation of isocyanate groups with polyol hydroxyl groups to form urethane bonds, significant differences emerge in reaction protocols and control requirements due to variations in dispersing media. The oil-based polyurethane synthesis predominantly employs either the one-step method or prepolymer method, conducted in organic solvents where water effects are negligible. The one-step method directly mixes polyol, isocyanate, and additives for immediate reaction, whereas the prepolymer method first synthesizes a prepolymer with terminal NCO groups before adding chain extenders for polymerization. The entire reaction is maintained at 60-80°C with viscosity controlled by solvent adjustments, ensuring stable and predictable outcomes. For water-based polyurethane synthesis, addressing water-isocyanate competition becomes critical, with the prepolymer method or acetone method being commonly used. The prepolymer method involves synthesizing the prepolymer in anhydrous conditions, neutralizing it with hydrophilic chain extenders, and dispersing it in water for subsequent reactions. The acetone method reduces system viscosity through acetone, facilitating hydrophilic modification and dispersion, followed by acetone removal to produce eco-friendly emulsions. Strict control of moisture content and pH levels is essential during reactions to prevent excessive isocyanate hydrolysis that could compromise product performance.

III. Catalysts: Catalysts in the system are designed to accelerate reactions. Due to differences in reaction systems, there are significant variations in catalyst selection and performance requirements. For oil-based polyurethane, organic tin compounds (e.g., dibutyltin di-lauroate) and organic bismuth/zinc compounds are commonly used. These catalysts exhibit high activity, efficiently promote reactions under ambient to moderate temperatures, demonstrate good compatibility with oil-based solvents, and remain stable during storage. To address the water absorption characteristic of solvents in oil-based coatings, some specialized catalysts also possess hydrolysis resistance, ensuring proper curing of the coating. For water-based polyurethane, catalyst selection must balance activity and system compatibility. Common choices include amine-based catalysts (e.g., triethylenediamine), eco-friendly metal salts (zinc, zirconate), and bio-based catalysts. Amine catalysts, with their strong alkalinity, are suitable for water-based foaming processes; metal salt catalysts, with their low toxicity, meet low-temperature curing requirements; while bio-based catalysts align with green and environmentally friendly trends. Traditional organic tin catalysts face limitations in water-based systems due to toxicity and compatibility issues. Water-based catalysts must avoid emulsion destabilization, and some products also require solutions for yellowing during storage.

IV. Application Fields: Performance Adaptation to Diverse Scenarios The application domains of these two types exhibit distinct segmentation characteristics, with core adaptations addressing varying performance and environmental protection requirements. Oil-based polyurethane, renowned for its exceptional water resistance, chemical corrosion resistance, and high hardness, finds extensive applications in industrial protection (chemical plant pipelines, bridge steel structures), ship coating, premium wood coatings, and floor coatings. Its rapid drying speed and high-gloss film formation enable long-term protection in harsh environments. However, due to higher VOC emissions, its use in interior decoration and sectors with stringent environmental requirements remains limited. Water-based polyurethane, with its core advantages of being environmentally friendly and low in VOCs, is primarily applied in interior coatings (wood coatings, wall coatings), textile and leather coatings, medical materials (wounds dressings, catheters), and new energy applications (battery separator coatings). Its flexible film formation and strong adhesion to various substrates allow room-temperature curing, complying with environmental regulations such as REACH and RoHS. However, due to hydrophilic groups, long-term water resistance requires modification optimization, with relatively slower drying speeds and the need for baking-assisted curing in certain scenarios